Guide · Jet A-1
Jet A-1 from refinery to wing: the supply chain and the documents that follow it
The TradeNexusMarket team · · Updated · 10 min read
Why paperwork matters more for jet fuel than for diesel
A truck can run on slightly off-spec diesel. An aircraft cannot take that risk, so aviation fuel is handled under stricter rules than any other petroleum product. The fuel has to meet a published specification when it leaves the refinery, and it has to be shown, at every handover, that nothing has changed since. The proof is a series of documents. Without them, an airport depot or into-plane company will refuse the product, however good it is.
For a buyer, this changes what due diligence means. With diesel you can test the product and decide. With Jet A-1 you also need the history of the batch, back to the refinery that made it.
The specifications behind Jet A-1
Jet A-1 is a kerosene-type fuel for turbine engines. Outside North America it is usually supplied to the DEF STAN 91-091 specification (UK Ministry of Defence) and ASTM D1655. Most international airports also work to the Joint Inspection Group (JIG) checklist known as AFQRJOS, which combines the strictest requirements of both. A refinery certificate will normally state which of these the batch meets.
Key limits buyers see on a certificate include a freezing point of −47 °C max, a flash point of 38 °C min, density between 775 and 840 kg/m³ at 15 °C, total sulphur of 0.30% (m/m) max and aromatics of 25% (v/v) max. The Jet A-1 product page lists the typical values. Jet A, used mostly inside the US, has a freezing point of −40 °C max and is not a substitute where Jet A-1 is required.
The supply chain, step by step
- Refinery. The fuel is made, stored in a tank and tested as a batch against the full specification. The refinery issues a Refinery Certificate of Quality (RCQ) for that batch.
- Transport to a terminal. The batch moves by ship, barge or pipeline to an import or intermediate terminal. Ships and pipelines often carry other products too, so contamination is the main risk.
- Terminal storage. At the terminal the fuel is received into a dedicated aviation tank, settled, and tested again before it can be released onward.
- Airport depot. The fuel moves by pipeline, rail or truck to the airport fuel farm, where it is received, filtered and checked again.
- Into-plane. Hydrant dispensers or refuellers put the fuel into the aircraft. Daily and pre-flight checks happen at this stage too.
Each handover is a point where the receiving party asks: is this the same fuel the refinery certified, and has anything happened to it on the way?
The documents and what each one proves
| Document | Issued by | What it proves |
|---|---|---|
| Refinery Certificate of Quality (RCQ) | The refinery | The batch was tested against the full specification and met it. It names the batch, tank, date and test results. This is the root document. |
| Certificate of Analysis (CoA) | A laboratory, often at a terminal | Test results on a sample at a later stage. It may cover all properties or a selection. |
| Recertification test certificate | The receiving terminal's laboratory | After transport by ship or multi-product pipeline, a set of key properties was tested again and compared with the RCQ. Results must be within the allowed differences. |
| Release note / certificate of conformity | The terminal or depot releasing the fuel | Confirms the batch delivered is traceable to the earlier certificates and meets the specification at release. |
| Inspector's quality and quantity report | An independent inspector | Confirms quantity and selected quality points at loading or discharge for the commercial deal. |
The rules for recertification and release at terminals are set out in the industry standard EI/JIG 1530, which most airport suppliers follow. A buyer does not need to know every clause. The practical point is simple: every certificate after the RCQ should refer back to it, and the batch numbers should line up.
What to check on the certificate itself
Most problems show up on the paper before anyone takes a sample. When an RCQ or a recertification certificate arrives, read it line by line against the offer:
- Document type. Is it really an RCQ from the refinery that made the batch, or a Certificate of Analysis from a laboratory further down the chain? Under EI/JIG 1530 a CoA is not to be treated as an RCQ, even when it covers the full table of tests.
- Specification named. The certificate should say which specification the batch was tested against, for example DEF STAN 91-091, ASTM D1655 or the AFQRJOS checklist, and that is the one your contract should name.
- Batch and tank. A batch number and tank number that match the offer, the tank papers and any later certificate.
- Laboratory, signatory and date. A recertification certificate carries the batch identity, the laboratory, the name of the person who signed it and the date. A certificate with no named laboratory or signatory cannot be checked with anyone.
- Results, not just "pass". The test results should be there in figures, so they can be compared with the earlier certificate. A sheet that only says "meets specification" tells you very little.
Then check the paper with the people who issued it, not with the seller. Our guide to verifying an SGS or Intertek report explains how to confirm an inspection report directly with the inspection company, and the same habit applies to a refinery or terminal laboratory.
Recertification and stored stock: when an old certificate is not enough
Under EI/JIG 1530, jet fuel that has travelled by marine tanker or through a pipeline that also carries other products has to be retested at the receiving terminal before it is used or moved on. The results must be within specification and show no significant change from the earlier certificate. If they do show a change, the batch is quarantined rather than released.
Time matters too. Storage manuals based on EI/JIG 1530 call for a periodic retest when jet stock has sat unmoved in a terminal tank for more than six months, and again every three months while it stays there. So a seller offering Jet A-1 "in tank, ready now" with only a refinery certificate from a year ago should also be able to show the retests since. Our Jet A-1 Fujairah page looks at this for product held at a Gulf storage hub, and our guide to tank storage receipts covers the tank papers that should sit alongside the quality papers.
Origin checks for Jet A-1 bound for Europe
The quality chain also tells you where the fuel came from, because the RCQ names the manufacturing refinery. That matters for sanctions. The EU has banned seaborne imports of Russian refined products since February 2023, and from 21 January 2026 it also bans products refined in third countries from Russian crude, with origin evidence expected except for listed partner countries. Our Jet A-1 Rotterdam page explains the rule in more detail.
Information only, not legal advice. Screen the refinery and the crude origin with your own compliance adviser before you commit to any cargo.
Why airports reject fuel
When a parcel of Jet A-1 is turned away, it is usually for one of these reasons:
- No RCQ, or an RCQ that cannot be traced. A certificate with no batch number, or one the refinery cannot confirm, breaks the chain.
- Recertification out of limits. If density or another property has moved more than allowed since the RCQ, it points to contamination in transit.
- Contamination with other products. Diesel, FAME (biodiesel) from shared pipelines or ships, or water. Jet fuel has a strict limit on FAME.
- Papers that do not match the parcel. Different quantities, dates or tank numbers between the offer, the certificate and the delivery.
- Product that was stored or shipped outside an aviation-quality system, for example in a tank also used for other products without proper cleaning and checks.
Checks a buyer can run on a Jet A-1 offer
- Ask for the RCQ before anything else, with the refinery name, batch number and date. Prices and the seller's client names can be blacked out.
- Confirm the refinery exists and makes jet fuel. Not every refinery has a jet fuel unit.
- Ask where the batch is now and what has happened since the RCQ. A cargo that has moved should come with a recertification certificate. Our Jet A-1 Rotterdam page shows how that chain works for imports into ARA, our Jet A-1 Fujairah page covers batches that have sat in storage at a Gulf hub, our Jet A-1 Singapore page covers cargoes priced and reloaded at the main Asian hub, and our Jet A-1 Houston page explains why a US pipeline barrel is Jet A until an export batch is certified as Jet A-1.
- Check that the dates make sense. A certificate from two years ago for fuel "available now" is a question you should ask.
- Agree in the SPA which specification applies (for example DEF STAN 91-091 or AFQRJOS), who inspects, and whose test result counts.
- Run the general company and document checks in our EN590 seller checklist. They apply to any fuel.
- Treat any request to pay a fee for storage papers, or to pay after a "dip test" before title is clear, as a reason to stop. Our guide to petroleum trading scams and their paper trail and the MT103 after dip test warning explain why.
Common questions
What is a Jet A-1 RCQ? The Refinery Certificate of Quality is issued by the refinery for one batch after it has been tested against the full specification. It names the batch, tank, date and test results, and every later certificate should refer back to it.
Is a Certificate of Analysis enough to buy Jet A-1? Not on its own. A CoA gives test results on a sample at a later stage and may cover only some properties. Airports look for the full chain: the RCQ, any recertification after transport, and a release note that ties the delivered batch back to the RCQ.
When does Jet A-1 need recertification? Whenever it has moved in a way that could let it pick up contamination, typically by sea tanker or through a pipeline that also carries other products. The receiving terminal's laboratory runs a reduced set of contamination-sensitive tests and compares the results with the earlier certificate. The industry standard for this is EI/JIG 1530.
How old can a Jet A-1 certificate of quality be? There is no single age that makes it invalid, but the paper has to match what has happened to the fuel since. After a sea voyage or a multi-product pipeline there should be a recertification certificate, and stock that has sat unmoved in a terminal tank for more than six months should have a periodic retest under storage procedures based on EI/JIG 1530.
Is "jet/kero" the same as Jet A-1? Not automatically. Price reports often group jet fuel and kerosene in one assessment, but only product certified to an aviation specification such as DEF STAN 91-091, with an RCQ to show it, is Jet A-1 as far as an airport is concerned. Our Platts and Argus benchmarks guide covers how those assessments are named.
Can Jet A be used instead of Jet A-1? Not where Jet A-1 is required. Jet A, used mostly inside the US, has a freezing point of −40 °C max, against −47 °C max for Jet A-1.
How TradeNexusMarket handles Jet A-1 sellers
A Jet A-1 seller on TradeNexusMarket can post without documents, but before a Deal Room opens it sends company papers and at least one proof of product: a tank storage receipt, a refinery allocation or supply contract, a mandate from the refinery or title holder, a recent invoice or bill of lading, or an SGS or Intertek report. Past deals with supporting documents count towards Gold. A person on our team checks each file.
Once a buyer and seller are matched, the quality papers for the specific parcel are shared in the Deal Room, stage by stage. Contacts stay masked until that point. Our article on escrow, payment instruments and verification covers how to protect the payment side of the same deal.
General information only. Airport and supplier quality systems differ; always follow the requirements of the receiving depot.
Post free, trade with checked companies
TradeNexusMarket is a B2B marketplace for EN590, Jet A-1, LPG, LNG, crude oil and other fuels. Posting is free and needs no documents. Contacts stay masked, our team makes the match, and both companies are checked before the Deal Room opens. Commission is charged only on a closed deal.
Related reading
- Guide · Red flagsThe most common petroleum trading scams, and the paper trail that exposes them
- Guide · Deal documentsHow to verify an SGS or Intertek report with the issuer
- Guide · Deal documentsWhat a TSR (tank storage receipt) is, and how to check one
- Guide · EN590How to check whether an EN590 seller is real: a 10-point checklist
- Guide · Payment and trustHow escrow, payment instruments and verification protect energy buyers
- Guide · Pricing referencesPlatts and Argus benchmarks explained: CIF NWE, FOB Singapore and FOB Arab Gulf
- Guide · EN590The EN590 10ppm specification explained, line by line