Guide · Red flags
Why "MT103 after dip test" is a warning sign in fuel offers
The TradeNexusMarket team · · Updated · 7 min read
The procedure you have probably been sent
Anyone who has asked for EN590 10ppm, gasoil or Jet A-1 on an open board has seen a version of this. The seller has product in storage at Rotterdam, Fujairah, Houston or Jurong. The buyer issues an ICPO, the seller sends a draft contract and a copy of a tank storage receipt, the buyer's inspector carries out a dip test, and then, usually within a day or two, "buyer pays 100% by MT103". Only after that does the seller transfer the product or the tank.
It reads like a normal sequence, and every term in it is real. The problem is the order. Payment lands between the test and the transfer, at the one point where the buyer knows that some product exists but has no control over it.
What an MT103 is, and what it is not
MT103 is the name of the SWIFT message banks used for a single customer credit transfer: one company's bank telling another bank to pay a named beneficiary a fixed amount. In everyday trade language, "pay by MT103" simply means pay by international wire. Since November 2025, SWIFT requires these cross-border payment instructions in the ISO 20022 format (the pacs.008 message), but the old name is still used in offer procedures and you will keep seeing it.
Three things matter for a buyer:
- It is a payment, not a security. An MT103 carries no conditions. Unlike a documentary letter of credit, no bank checks a bill of lading or an inspection report before releasing the money. Once the beneficiary's bank credits the account, the transfer is done.
- Getting it back depends on other people. A bank can send a recall request, but the receiving bank, and usually the beneficiary, have to agree. If the account belongs to a fraudster, money is often moved on within hours.
- A copy proves nothing. A PDF or screenshot "MT103" is easy to type up. A seller should confirm receipt with its own bank, and a buyer should never accept a copy of someone else's MT103 as proof of anything.
None of this makes the wire transfer itself suspicious. Most fuel cargoes are eventually paid by bank transfer or under a letter of credit. The question is only what the buyer holds at the moment it pays.
What a dip test proves, and what it does not
A dip test is a gauging of a shore tank: the inspector measures the product level (traditionally with a weighted tape, the "dip"), takes temperature readings and samples, and works out the quantity and quality in the tank at that moment. Done properly by an independent inspector the buyer appointed, it is genuinely useful.
But look at what it does not tell you:
- Who owns the product. The tank may hold diesel that belongs to a different company entirely. Only the terminal knows who its client is for that tank, and the tank storage receipt is only worth something if the terminal confirms it.
- That it will be transferred to you. The dip says nothing about whether the terminal has accepted your company as a client, or whether you have a receiving tank or a nominated vessel.
- That the inspector was really independent. If the seller arranged the inspector, or the terminal contact came from the seller's paperwork, the report may be borrowed, staged or forged.
Rotterdam's own anti-fraud work shows why this matters. The storage spoofing task force run by the Port of Rotterdam Authority, VOTOB (the Dutch tank storage association), TCT The Commodity Traders and the seaport police publishes a public blacklist of fake terminal websites at storagespoofing.nl, and states that any deal requiring the buyer to pay for an "authorisation to verify" or a "dip test authorisation" should be considered wrong by definition. Dutch press reporting in early 2026 also described fraud networks filming so-called quality tests at real port sites to make fake companies look credible. A tank you have seen is not a tank you own.
Why the combination is the real warning sign
Put the two halves together and the buyer's position after paying looks like this: a lot of money has left by a transfer that is very hard to reverse, and in exchange the buyer holds a test report about a tank that is still in someone else's name. Everything that would protect the buyer comes later: the terminal recording a change of holder, the injection into the buyer's tank, a new receipt in the buyer's name. Those later steps are exactly the ones a fake seller never has to perform.
Real tank deals run the other way round. In a genuine tank-to-tank transfer or tank take-over, payment normally follows the terminal's own confirmation that the product is now held for the buyer, plus the inspector's figures. In a tank-to-vessel lift, it follows the loading documents. "Payment after injection" is common; "payment after dip" is not the same thing, even though the wording is close.
It also tends to travel with other demands:
- Fees before the dip. "Dip test authorisation", tank rent, "ATV" or document endorsement fees paid to the seller or a company it names. These are the fee that most fake deals actually exist to collect. See what ATV, ATS and DTA papers are, and who can really issue them.
- The seller's inspector only, or an inspector you may choose but who "must be approved by the terminal" through a contact the seller supplies.
- A short clock. Payment within 24 or 48 hours of the dip "or the tank is released to the next buyer".
- No room for an LC or escrow. The procedure refuses any instrument that would tie payment to the transfer.
- A beneficiary account that does not match. A personal account, a company other than the seller, or a bank in a different country from the seller's registration.
- Requests for your own bank details or a draft of your MT103 before anything is verified, often to be passed along a chain of brokers.
The same script turns up in Jet A-1 offers and with sellers of Gasoil D2 and fuel oil out of storage, at every hub. Fuel oil offers often arrive under the label "D6 virgin"; our guide to what D6 virgin fuel oil really is explains which real grades sit behind it.
A safer order of steps
Nothing here stops a genuine seller from getting paid quickly. It only moves the payment to after the point where the buyer actually holds something.
- Check the company and the person. Registry, domain, directors, who holds title. Our EN590 seller checklist covers each check.
- Agree the SPA first, including the exact payment trigger, the inspector, who pays for what, and the terminal procedure. The LOI, ICPO, SPA and POP guide shows where each step sits.
- Confirm the receipt with the terminal yourself, using contact details from the terminal's own website, not the seller's documents.
- Set up your side: your own storage agreement and receiving tank, or a nominated vessel the terminal has accepted.
- Test with your own inspector, appointed and paid by you, with the report sent to you directly.
- Transfer, then pay. Payment follows the terminal's written confirmation that the product is held in your name, or the loading documents for a vessel. If you want the money committed earlier, use escrow or a letter of credit with release tied to that confirmation.
How this works on the ground differs by port. Our EN590 Rotterdam, EN590 Fujairah, EN590 Singapore and EN590 Houston pages describe the terminals, transfers and paperwork at each hub.
If a seller will accept every step above except the last one, you have learned what you needed to know.
Common questions
What if the dip test was done by SGS or Intertek? Confirm it with the issuer through its official website; our guide on verifying an SGS or Intertek report shows how. Even a genuine report only proves what was in the tank, not who can sell it to you.
Can I recall an MT103 if the deal goes wrong? Your bank can ask, but the receiving bank and usually the beneficiary have to cooperate. Do not plan on it.
The seller says the terminal requires payment before transfer. Is that true? Ask the terminal directly. Terminals act on their own client's written instruction. Your storage fees, if you lease a receiving tank, are paid to the terminal under your own agreement with it; the terminal does not need you to pay the seller before it moves product.
Using TradeNexusMarket for storage deals
Posting a buy or sell requirement on TradeNexusMarket is free. Before a Deal Room opens, sellers show our team company papers and a proof of product, and a person on our team checks the files before the two sides are introduced. Posts that pass carry a POP Approved or POF Approved badge on the public board. No fees are collected for documents or dip tests, and the full rules are on our Deal Room rules page.
Product pages: EN590 10ppm, Gasoil D2, Jet A-1 and Fuel oil. Ready to post a requirement? Create a free account.
General information only, not legal or banking advice. Payment terms are set by your SPA and your bank; confirm terminal procedures with the terminal.
Post free, trade with checked companies
TradeNexusMarket is a B2B marketplace for EN590, Jet A-1, LPG, LNG, crude oil and other fuels. Posting is free and needs no documents. Contacts stay masked, our team makes the match, and both companies are checked before the Deal Room opens. Commission is charged only on a closed deal.
Related reading
- Guide · Red flagsThe most common petroleum trading scams, and the paper trail that exposes them
- Guide · Deal documentsWhat a TSR (tank storage receipt) is, and how to check one
- Guide · Deal structuresTTT vs TTO vs TTV: how diesel actually changes hands at a terminal
- Guide · Payment and trustHow escrow, payment instruments and verification protect energy buyers
- Guide · EN590How to check whether an EN590 seller is real: a 10-point checklist
- Guide · Jet A-1Jet A-1 from refinery to wing: the supply chain and the documents that follow it