Guide · Deal structures
TTT vs TTO vs TTV: how diesel actually changes hands at a terminal
The TradeNexusMarket team · · Updated · 8 min read
Three labels, three different deals
Offers for EN590 10ppm and gasoil sold out of storage usually carry one of three abbreviations. Each describes a different physical event, and the proof a buyer should ask for changes with it.
- TTT (tank-to-tank). Product is pumped from the seller's shore tank into a tank the buyer has leased, normally at the same terminal or a terminal connected to it by pipeline. The diesel physically moves, and it ends up in a tank where the terminal recognises the buyer as its client.
- TTO (tank take-over). The product does not move. The terminal changes its records so that the buyer, not the seller, is the client holding that product in that tank (sometimes the tank lease itself is transferred too). You will also see it written as "in-tank title transfer". The key fact: only the terminal can make this happen.
- TTV (tank-to-vessel). Product is loaded from the seller's shore tank into a vessel or barge the buyer has nominated. Commercially this usually sits under an FOB or ex-tank sale; the buyer arranges the ship and the cargo leaves the terminal.
In practice the labels get mixed. Some brokers write TTO for a tank-to-vessel lift ("tank to out"), and some use TTV and FOB interchangeably. That is not always dishonest, but a take-over, a transfer and a lift are verified differently, so if an offer just says "TTO/TTV", ask in writing which one is meant. None of these labels is an Incoterms rule either; our guide to Incoterms for oil cargoes explains how FOB differs from an in-tank sale.
Where each one is normally used
All three structures belong to storage hubs, where independent terminals rent tank space to trading companies: for diesel, mainly ARA (Amsterdam–Rotterdam–Antwerp), Fujairah, the US Gulf Coast around Houston, and Singapore.
TTT makes sense when both sides already hold storage at the same terminal and the buyer wants to keep the product in tank: to blend it, to resell it in smaller parcels, or to wait for a better time to lift. Our EN590 Rotterdam page shows how this works at the busiest European hub. At Fujairah, transfers between different terminals run over the port's shared manifold; our EN590 Fujairah page explains that set-up. Singapore has no shared manifold: a TTT there is an in-tank transfer inside one terminal, a pipeline move between connected sites, or a short shuttle by small tanker or barge, as our EN590 Singapore page explains.
TTO is the lightest structure on paper and the hardest to check from outside. It appears in genuine trade, typically between established companies that both already deal with the terminal, but in open-market email offers it is the label most often attached to product that does not exist.
TTV is the normal route when the buyer needs the diesel somewhere else, by sea or by inland barge. Because a ship has to be nominated, accepted, loaded and surveyed, it leaves a much heavier trail of independent paperwork than either tank structure, and it brings laytime and demurrage into the contract. The same three structures apply to Gasoil D2 and fuel oil in storage.
The document trail for each structure
| Step | TTT (tank-to-tank) | TTO (tank take-over) | TTV (tank-to-vessel) |
|---|---|---|---|
| Proof the product exists | TSR from the terminal in the seller's name, plus a recent tank test | TSR from the terminal in the seller's name, plus a recent tank test | TSR or terminal allocation, plus a recent tank test |
| Buyer's side | A tank storage agreement (TSA) with the terminal in the buyer's name | Terminal acceptance of the buyer as its client | Vessel nomination, terminal acceptance of the vessel |
| Inspection | Independent inspector nominated by the buyer: tank test before, measurement after transfer | Independent inspector tests the tank before the title change | Independent inspector at loading: shore and vessel quantity, quality sample |
| Proof it happened | Terminal's transfer (injection) confirmation and a new TSR in the buyer's name | New TSR or terminal confirmation naming the buyer as holder | Bill of lading, certificate of quantity and certificate of quality (CoQ) from loading |
| Usual payment trigger | After the product is in the buyer's tank and tested | After the terminal confirms the buyer holds the product | Against the loading documents, by bank transfer or letter of credit |
Two documents carry most of the weight. The first is the tank storage receipt, which ties a named company to product in a named tank on a date. The second is whatever proves the change actually happened: a transfer or injection confirmation for TTT, a new receipt for TTO, a bill of lading for TTV. Every one of them should come from, or be confirmable with, the terminal or the inspector, not just the seller.
The inspector matters as much as the paperwork. In a sound deal the buyer nominates its own independent inspection company and receives the report directly. If the seller insists on its own inspector only, you are relying on the seller's word with a logo on it.
Red flags specific to tank deals
- "TTT" with no tank number and no terminal name. A genuine transfer starts from a specific tank at a specific terminal. If the seller will name the port but not the terminal or tank until you pay or sign, there is nothing to verify.
- The buyer has no tank, and the seller offers to "arrange" one. A real TTT needs a receiving tank in the buyer's own name under its own agreement with the terminal. A seller-supplied tank, paid for up front, is a classic way to collect a fee.
- Fees before the dip test. Requests for tank rent, injection fees, "ATV endorsement" or dip-test charges paid to the seller before you have seen product are the core of the storage-spoofing scam. The Port of Rotterdam has publicly warned traders about exactly this pattern; our ATV, ATS and DTA guide explains what those permissions really are and who can give them.
- Injection reports that cannot be checked. A transfer confirmation that arrives as a scan, from a free email address, with no reference the terminal will recognise, proves nothing. Real terminals generate these from their own systems.
- Labels that shift during the deal. An offer that starts as TTV, becomes TTT when you ask about the vessel, then TTO when you ask about your tank, is avoiding the step that would expose it.
- A take-over deed signed only by the seller. In a TTO, the change of holder is the terminal's act. A document from the seller saying it has "transferred" the tank to you has no effect on the terminal's records.
How verification differs: tank versus vessel
For TTT and TTO, almost everything depends on the terminal. You (or your inspector) need the terminal to confirm, through contact details you found yourself, that the seller is its client, that the stated product and quantity are in the stated tank, and that it will carry out the transfer or record the change of holder. If the terminal will not accept your company as a client, the deal cannot be executed, whatever the paperwork says.
For TTV, the checks spread across more independent parties: a vessel with its own owner and identity numbers that can be looked up, a terminal that must accept the nomination, an inspector who measures what goes on board, and a bill of lading for that loading. It is harder to fake a whole lift than a single receipt.
In either case, the order of events is the protection: confirm the seller's company first (our EN590 seller checklist covers this), agree the procedure in the SPA, confirm with the terminal, test, and pay only against something you can verify. The LOI, ICPO, SPA and POP guide shows where each step falls, and escrow and verification covers how payment can be tied to the terminal's confirmation.
With Jet A-1, ask for the batch's quality papers as well as the tank papers: the refinery certificate of quality and, if the fuel reached the terminal by sea or through a multi-product pipeline, the recertification certificate. Our Jet A-1 supply chain guide explains that chain.
No structure is safe by its name alone. TTT, TTO and TTV are descriptions of what should happen; the protection comes from checking that it did.
Common questions
Is TTO the same as TTT? No. In TTT the diesel is pumped into a different tank that the buyer leases. In TTO it stays in the same tank and the terminal records a new holder. Some offers use the two loosely, so ask which one is meant.
Can a buyer without storage do a TTT? Not on its own. The buyer needs a receiving tank under its own agreement with the terminal, or it should look at a vessel lift (TTV) or a delivered deal instead.
Which structure is easiest to verify? Usually TTV, because the vessel, the terminal, the inspector and the bill of lading are separate parties that can each be checked. Tank structures rely heavily on the terminal's confirmation.
Is a seller's injection report enough to pay? No. Payment should follow the terminal's own confirmation and your inspector's results, not a document passed on by the seller.
Using TradeNexusMarket for tank deals
Posting a buy or sell requirement on TradeNexusMarket is free. Sellers send company papers and at least one proof of product before a Deal Room opens, and a person on our team checks it before the two sides are introduced. Posts that pass carry a POP Approved or POF Approved badge on the public board, and the full rules are on our Deal Room rules page.
Product pages: EN590 10ppm, Gasoil D2, Jet A-1 and Fuel oil. For which sulphur grade a gasoil offer should be, see our gasoil 10ppm vs 500ppm guide. Ready to post a requirement? Create a free account.
General information only, not legal advice. Terminal procedures differ; always confirm the procedure with the terminal and in your SPA.
Post free, trade with checked companies
TradeNexusMarket is a B2B marketplace for EN590, Jet A-1, LPG, LNG, crude oil and other fuels. Posting is free and needs no documents. Contacts stay masked, our team makes the match, and both companies are checked before the Deal Room opens. Commission is charged only on a closed deal.
Related reading
- Guide · Deal documentsWhat a TSR (tank storage receipt) is, and how to check one
- Guide · EN590How to check whether an EN590 seller is real: a 10-point checklist
- Guide · ProductsGasoil 10ppm vs 500ppm: what the sulphur grade means and who buys which
- Guide · Crude oilLOI, ICPO, SPA, POP: the crude oil deal process in plain English
- Guide · Payment and trustHow escrow, payment instruments and verification protect energy buyers