A name you won't find in any standard

If you have spent any time on fuel offer boards or in trading groups, you have seen it: "D6 Virgin Fuel Oil, FOB Rotterdam or Houston, trial cargo then 12-month contract." It reads like a product code. It isn't one.

There is no grade called D6 in ASTM D396, the US specification for fuel oils, and none in ISO 8217, the international standard for marine fuels. There is no "virgin" grade in either. Russia's mazut standard, GOST 10585, doesn't use the term either. A refinery's quality certificate will name a standard and a grade, never "D6 virgin".

That doesn't mean everyone who writes "D6" is dishonest. Plenty of new buyers learned the word from the offers they were sent, and some of the fuel behind those offers is real. But the label tells you almost nothing about what is in the tank, and it is one of the strongest signals that an offer came from a recycled template. Our fuel oil page lists D6 enquiries under fuel oil for exactly that reason: the seller has to name the real grade.

Where "D6" comes from: No. 6 fuel oil and Bunker C

The closest real product is No. 6 fuel oil under ASTM D396. That standard sets out fourteen grades of burner fuel. Grades No. 1 and No. 2 are distillates, the kind used in home heating and small burners. Grades No. 5 (Light), No. 5 (Heavy) and No. 6 are residual fuels: what is left after the lighter cuts of crude have been boiled off. ASTM describes them as fuels of increasing viscosity for industrial burners, and notes that they usually need to be heated before they can be pumped and atomised.

No. 6 is the heaviest of them. The US Energy Information Administration's glossary says No. 6 fuel oil includes Bunker C, and lists its uses as power generation, space heating, ship bunkering and industrial purposes. So "Bunker C", "No. 6" and "residual fuel oil" are real, overlapping names for heavy fuel.

"D6" looks like a shorthand built the same way as "D2", the equally informal label used for gas oil. The "D" in "ASTM D396" is part of the standard's number, not a product prefix, so a spec sheet titled "D6 per ASTM D396" already mixes up two different things. (If you're also being offered "D2", our EN590 specification guide covers what that label usually means, our gasoil 10ppm vs 500ppm guide explains the 10ppm and 500ppm sulphur grades, and our Gasoil D2 page shows how we list it.)

What "virgin" means, and why it isn't a spec

In refinery language the closest real word is straight-run: product that comes straight off distillation, without being cracked in a conversion unit. A straight-run residue is a genuine traded material, but it is mostly sold to refiners as a feedstock for further processing, which is a different trade from finished fuel oil sold to burn.

In offer emails, "virgin" usually means something vaguer: "fresh", "not recycled", "straight from the refinery". It's a sales word. None of the standards treats it as a quality. ISO 8217 even says that fuels may include hydrocarbons from recycled sources, as long as the fuel meets the limits. What matters is not the adjective but the test results, and ISO 8217 has specific tests for the things "virgin" is meant to reassure you about, such as used lubricating oil, sediment and catalyst fines.

If a seller insists the product is "virgin", ask what that means in the SPA. If it isn't defined as a measurable limit in the specification, it has no contractual value.

The real grades behind a fuel oil offer

A genuine fuel oil offer names one of a small number of specifications. These are the ones you are most likely to meet:

What the offer should sayStandardWhat it isViscosity is measured at
No. 6 fuel oil (Bunker C)ASTM D396US burner-fuel grade, heaviest residual100 °C
HSFO 380 / RMG 380 (RMG 380H in the 2024 edition)ISO 8217Marine residual fuel, sulphur above 0.50%50 °C
HSFO 700 / RMK 700 (RMK 700H)ISO 8217Heavier, denser marine residual50 °C
VLSFO / RMG 380-0,5 and similarISO 8217Marine residual with 0.50% sulphur or less50 °C
Mazut M100GOST 10585Russian-standard boiler fuel oil, split by sulphur content100 °C
The numbers in a grade name (380, 700) are maximum viscosities, not quality scores.

ASTM D396 No. 6. The grade sets a minimum flash point of 60 °C, a maximum of 2.00% water and sediment by volume, and a kinematic viscosity at 100 °C between 15.0 and 50.0 mm²/s. Sulphur is not fixed in the grade itself; local rules set it. It is mainly a land fuel for boilers and industrial burners.

ISO 8217 residual marine grades. The 2024 edition (the seventh, replacing 2017) splits residual fuels by sulphur. Grades at or below 0.50% sulphur carry a suffix such as RMG 380-0,5; grades above 0.50%, the old HSFO, now carry an "H", such as RMG 380H and RMK 700H. Most offers still use the 2017 names, RMG 380 and RMK 700, and that's fine as long as the edition is stated. For the high-sulphur grades the standard sets, among other things, a 60 °C minimum flash point, a 2.00 mg/kg limit for hydrogen sulphide, 0.50% maximum water and a 0.10% limit on total sediment, plus maximum density, ash, vanadium, sodium and aluminium plus silicon.

Mazut M100. The GOST 10585 boiler grade most often quoted in offers. Its viscosity is set at 100 °C and it comes in sub-types by sulphur content, so "M100" alone is incomplete. Russian-origin product is covered by sanctions; see the note further down.

If the "D6" you're offered turns out to be one of these, good: from that point on, talk about the real grade and ignore the label.

Who can still burn high-sulphur fuel oil

A lot of "D6" offers are pitched as ship fuel. Before you look at the spec, it is worth asking who could legally use what is on offer, because the rules for ships changed in 2020.

Since 1 January 2020, under the rule known as IMO 2020 (an amendment to MARPOL Annex VI), fuel oil used on board ships outside emission control areas may contain no more than 0.50% sulphur by mass. The old limit was 3.50%. Inside emission control areas the limit is 0.10%. Those areas are the Baltic Sea, the North Sea, the North American area, the US Caribbean Sea area and, since 1 May 2025, the whole Mediterranean Sea. The Canadian Arctic and the Norwegian Sea are next, with the limit taking effect from 1 March 2027.

A second rule, in force since 1 March 2020, bans ships from even carrying fuel above 0.50% sulphur for their own use unless they have an approved exhaust gas cleaning system, a scrubber, fitted. The IMO says most ships now burn very low sulphur fuel oil (VLSFO) instead.

So high-sulphur fuel oil (RMG 380H, RMK 700H, and most of what gets called "D6") still has buyers, but a narrower set of them: ships fitted with scrubbers, and power plants or industrial boilers ashore, where national rules decide what sulphur is allowed. If a seller is offering "D6" as bunker fuel to anyone, ask which of those buyers it is meant for. An HSFO offer described as "IMO 2020 compliant" with no mention of scrubbers has the rule the wrong way round.

What a real specification and certificate look like

A seller who actually controls fuel oil can send two different documents, and it helps to know which is which.

  • A typical specification. A table of properties with limits, naming the standard and edition (for example "ISO 8217:2017 RMG 380"). This is what the SPA should attach. It describes what the seller promises to deliver.
  • A certificate of quality (CoQ) or certificate of analysis. Actual test results for a real sample, issued by a refinery laboratory or an independent inspector. It names the tank or vessel, the sample date, the sample identification and the test method used for each line.

For a residual fuel, the results you should expect to see include viscosity (at the temperature the standard uses), density at 15 °C, sulphur, flash point, water, total sediment, micro carbon residue, pour point, ash, vanadium, sodium and aluminium plus silicon. For marine grades, also hydrogen sulphide, acid number and CCAI. A sheet that lists only sulphur, viscosity and "standard quality" is not a certificate.

Then check the certificate with whoever issued it, using contact details you found yourself rather than the ones printed on the page. Our guide to verifying an SGS or Intertek report explains what to send and what to match. Before any cargo is paid for, your own inspector should sample and test at loading or at the tank.

If the fuel is delivered to a ship as bunkers, there is one more document. MARPOL Annex VI (regulation 18) requires a bunker delivery note for every delivery to a ship of 400 gross tonnage or more. It must show the ship's name and IMO number, the port and date, the supplier's name, address and phone number, the product name, the quantity in tonnes, density at 15 °C, sulphur content and, for deliveries since 1 May 2024, the flash point, plus a signed declaration that the sulphur does not exceed the applicable limit. A sealed sample, signed by the supplier and the ship, goes with it. The ship keeps the note for three years and the sample for at least 12 months. A "D6" seller who cannot say which licensed bunker supplier would issue that note is not selling bunkers.

How a typical fake D6 offer is built

Fake D6 offers are remarkably similar to each other, because many of them come from the same templates. The structure usually looks like this:

  • A soft corporate offer listing a whole menu: "D6 virgin", "D2", "JP54", EN590, Jet A-1, sometimes urea and LNG, all from the same small company.
  • Huge monthly quantities on a 12-month contract, often with a "trial cargo" first.
  • Product said to sit in storage at several famous hubs at once, often Rotterdam and Houston, with no terminal or tank number.
  • A procedure that runs ICPO, then "seller issues commercial invoice", then the buyer pays for a "dip test" or "tank injection", with payment by MT103 before the buyer has any independent proof of what it is buying.
  • A spec sheet with round numbers, no edition of any standard, and the grade written as "D6".

Each of those steps is explained in its own guide: the MT103 after dip test pattern, what a tank storage receipt can and can't prove, and why "injection" in a tank-to-tank transfer has to be confirmed by the terminal, not by the seller.

The other labels on the same menu are worth a second look too. "D2" is as informal as "D6", as explained above. "JP54" is not a jet fuel specification at all: our Jet A-1 Houston page explains that 54 is a US pipeline product code for Jet A-quality fuel. When one sender mixes all three, the menu itself is the warning.

Red flags specific to D6 offers

  • The grade is written only as "D6" or "D6 virgin". Ask which standard and grade. If the answer is still "D6", stop.
  • "Per ASTM D6" or a test-method number used as the product name. It shows the sheet was assembled by someone who doesn't know what the numbers mean.
  • Viscosity with no temperature or unit. A figure like "380" only means something at a stated temperature (50 °C for ISO 8217 marine grades) and in a stated unit (mm²/s, also written cSt). A sheet that leaves them out was probably not copied from a laboratory result.
  • No terminal, no tank number, no title holder. A seller who controls product knows where it is and who owns it today.
  • Payment requested before your own inspection. That includes "dip test fees", "storage fees" and "document fees" paid to a party the seller nominates.
  • Russian-origin M100 offered as "origin any" or relabelled. Origin has to be documented; see the sanctions note below.
  • High-sulphur fuel oil sold as "IMO 2020 compliant" bunkers. Fuel above 0.50% sulphur can only be used on a ship with an approved scrubber. Ask who the end user is.
  • A price described as a big discount to Platts. Real fuel oil trades close to published benchmarks. A deep discount is the hook, not the deal.

What to ask for instead

If you want to buy fuel oil, the most useful thing you can do is stop using the word "D6" in your own enquiries and ask for the product by its real name. A short request that serious sellers can answer looks like this:

  • Grade and standard, with edition: for example ISO 8217:2017 RMG 380, ISO 8217:2024 RMG 380H, ASTM D396 No. 6, or GOST 10585 M100 with sulphur sub-type.
  • Delivery term and named place, such as FOB a named load port or CIF a named discharge port. Our Incoterms guide explains what each one moves.
  • Origin and the documents that prove it.
  • A recent certificate of quality for the actual tank or cargo, with the issuer's details, so you can check it yourself.
  • Where the product is, who holds title, and how the transfer will be confirmed.
  • Payment against documents and inspection, usually a letter of credit, not money up front.

The order matters as much as the documents. Our guide to the LOI, ICPO, SPA and POP sequence shows where each paper belongs, and escrow and verification for energy buyers covers tying payment to the transfer. For the seller's company itself, the checks in how to verify a seller apply to fuel oil just as they do to diesel.

A note on Russian-origin fuel oil

Mazut M100 and other Russian-origin fuel oil are covered by EU, UK and US sanctions, including import bans and price-cap rules on shipping and financing. The tanker matters as much as the cargo; see our vessel sanctions screening guide. We describe the grade for information only, so buyers can recognise it in an offer. Every TradeNexusMarket member agrees to sanctions screening, and our team does not match deals that break these rules.

Common questions

Is D6 fuel oil the same as No. 6 fuel oil? That's usually what sellers mean, but "D6" is not a defined grade. ASTM D396 defines No. 6 fuel oil, a heavy residual also called Bunker C. Ask the seller to name the standard and grade so the SPA can attach a real specification.

Is "D6 virgin fuel oil" always a scam? Not always, but the label is closely tied to recycled scam templates. Treat it as a reason to ask for the real grade, a recent certificate of quality you can check with the issuer, and a named terminal and tank before going further.

What is the difference between D6, HSFO and M100? HSFO is high-sulphur marine fuel oil under ISO 8217, such as RMG 380 or RMK 700. M100 is a Russian-standard boiler mazut under GOST 10585. "D6" is an informal label that may be used for either, or for ASTM No. 6.

Can ships still use high-sulphur fuel oil? Only with an approved scrubber. Since 1 January 2020 fuel used on board outside emission control areas must have 0.50% sulphur or less (0.10% inside them), and since 1 March 2020 ships without a scrubber may not carry higher-sulphur fuel for their own use.

Is JP54 a real fuel? No. There is no JP54 specification. Real jet fuel is sold as Jet A-1 or Jet A under named standards; "54" is a US pipeline product code, and offers that use it as a grade name usually come from the same templates as "D6".

What does "virgin" mean in a fuel oil offer? Nothing measurable. In refining, the nearest term is straight-run, meaning not cracked. If the word matters to you, turn it into test limits in the specification.

How fuel oil is handled on TradeNexusMarket

On TradeNexusMarket there is no separate D6 category. Fuel oil posts name the real grade, such as HSFO 380, VLSFO or Mazut M100, along with the delivery term, port and quantity. Posting is free. Before a Deal Room opens, sellers show our team company papers and a proof of product, and a person on our team checks them. Inside the room the stages run in order: signed SPA, inspection, payment instrument, then shipment. The full sequence is in our Deal Room rules.

See the fuel oil page for grades and terms, browse the public board, or create a free account to post a requirement.

General information only, not technical or legal advice. Specification limits are summarised from the standards named; always use the full current standard and an independent inspector for a real deal.

Post free, trade with checked companies

TradeNexusMarket is a B2B marketplace for EN590, Jet A-1, LPG, LNG, crude oil and other fuels. Posting is free and needs no documents. Contacts stay masked, our team makes the match, and both companies are checked before the Deal Room opens. Commission is charged only on a closed deal.

Open a free account No documents to sign up. Commission only on a closed deal.

Related reading