Guide · Crude oil
How to read a crude oil assay for the first time
The TradeNexusMarket team · · Updated · 11 min read
What an assay is, and what it isn't
Ask a refinery buyer what they need before they will look at a crude offer, and the answer is nearly always the same: the grade name and an assay. The assay is a laboratory study of the grade. It reports the properties of the whole crude, then splits the crude into boiling ranges and tests each one, so a refiner can estimate how much naphtha, kerosene, gasoil and residue the crude will give, and how hard each cut will be to treat.
Two things follow from that. First, an assay describes a grade, usually from a sample taken at some point in the past. It is not a measurement of the cargo you are being offered. Second, grades drift. Fields age, new wells come on, blends change, so a good assay always carries a date, and buyers prefer recent ones.
Producers and the big marketers publish assays for the grades they sell. ExxonMobil, for example, keeps a public library of assays that anyone can download as PDF or spreadsheet, listing each grade's API gravity, sulphur, region and type. Its own disclaimer is a useful reminder: the publisher gives no guarantee of accuracy, and each user has to judge how to apply the numbers. An assay helps you decide whether a grade fits. It doesn't promise what is in a particular tank.
The first page: whole-crude properties
Most assays open with a summary of the whole crude. These are the lines buyers read first, and the ones you will see repeated in offers.
| Line on the assay | What it tells you | Usual test |
|---|---|---|
| API gravity | How light or heavy the crude is. Higher API means lighter oil, which usually yields more of the lighter, higher-value products. | ASTM D287, D1298 or D4052 |
| Density at 15 °C | The same property in kg/m³ or g/cm³. It should agree with the API figure. | ASTM D1298 or D4052 |
| Total sulphur | Sweet or sour. More sulphur means more treating to make low-sulphur fuels. | Commonly an X-ray method such as ASTM D4294 |
| Total acid number (TAN) | Naphthenic acid content, a corrosion risk in the crude and vacuum units. | ASTM D664 |
| Pour point | The temperature below which the crude stops flowing; high pour point means a waxy crude that may need heated handling. | ASTM D97 |
| Viscosity | How thick it is at stated temperatures, which affects pumping and heating. | ASTM D445 |
| Salt (as chloride) | Salt that must come out in the refinery's desalter before distillation. | ASTM D3230, reported in PTB (pounds per 1,000 barrels) |
| BS&W / water | Basic sediment and water carried with the oil. | ASTM D4007 |
| Nickel, vanadium and other metals | Catalyst poisons that collect in the heavy end. | ICP or X-ray methods such as ASTM D7691 or D8252 |
API gravity and sulphur: light, heavy, sweet, sour
API gravity is not measured directly. It is a function of specific gravity at 60 °F: API = 141.5 ÷ specific gravity − 131.5. Water comes out at 10 °API. A crude with a specific gravity of 0.850 works out at about 35 °API, and a crude at 19.5 °API has a specific gravity of about 0.937. That makes it a free consistency check: if an assay quotes both density and API, the two numbers should agree to within rounding.
The bands most people use are: light above about 31.1 °API, medium between about 22.3 and 31.1, heavy between 10 and 22.3, and extra-heavy below 10. On sulphur, crude under about 0.5% is called sweet and crude above it sour. Those labels are conventions, not contract terms, and you will see sellers stretch them.
To get a feel for the range, here are four grades from one public assay library. The figures are typical values as published, not a cargo specification.
| Grade (origin) | API gravity | Sulphur, % wt | How it is usually described |
|---|---|---|---|
| WTI Light (United States) | 47.4 | 0.07 | Light, sweet |
| Qua Iboe (Nigeria) | 37.3 | 0.12 | Light, sweet |
| Upper Zakum (UAE) | 33.4 | 2.09 | Medium, sour |
| Cold Lake Blend (Canada) | 19.5 | 3.87 | Heavy, sour |
Notice that Upper Zakum sits in the light-to-medium gravity range yet carries more than 2% sulphur. Gravity and sulphur are separate questions, and a refinery cares about both.
For a worked example of one grade, our Bonny Light page sets a dated public assay next to the loading, pricing and paperwork checks for Nigeria's best-known crude. Our Murban page does the same for Abu Dhabi's light grade, whose published sulphur is about five times Bonny Light's. Our Basrah Medium page covers Iraq's medium sour grade, where API de-escalators and salt content matter as much as sulphur. Our WTI Midland page shows why a light US grade's spec band (40° to 44° API) matters more than the single "WTI" figure in a table like the one above.
TAN, metals and salt: the lines that cost refiners money
TAN. Total acid number is the milligrams of potassium hydroxide needed to neutralise one gram of oil, measured with ASTM D664. A common industry rule of thumb treats whole crude above about 0.5 as high-acid, and many refiners blend their crude slate down to a limit around there. Refiners also say openly that TAN on its own is a poor predictor of corrosion, because the acids are not spread evenly across the boiling range, which is why good assays report TAN for each cut as well as the whole crude.
Metals. Nickel, vanadium, iron and copper sit in organometallic compounds, from a few parts per million up to around 1,000 ppm by weight depending on the crude. They concentrate in the heavier fractions and deactivate catalysts, especially in the units that crack vacuum gasoil and residue. A heavy, high-metals crude can be fine for one plant and unusable for another.
Salt and water. Salt is reported as chloride in PTB. Refining texts put the point where desalting becomes necessary at around 10 PTB, and the ASTM method notes that chloride left in the crude raises corrosion and harms catalysts. Water and sediment matter commercially too: on the inspector's quantity certificate, BS&W is deducted from gross standard volume to arrive at the net standard volume you actually pay for.
The cut table: where the value is
The second half of an assay is a table of cuts. In the lab, the crude is distilled in a column under ASTM D2892, the true boiling point or "15/5" method, up to 400 °C atmospheric equivalent temperature. The residue is then distilled under vacuum with ASTM D5236, which for most samples reaches about 565 °C. ASTM itself notes that D2892 gives yields that are valuable in commercial discussions, and that curves from the two methods are not directly comparable. The distillation work alone can take days.
Each column in the cut table is one boiling range, and each row is a property of that cut:
- Light ends and LPG, then light and heavy naphtha: feed for gasoline and petrochemicals. Look at the yield and, for naphtha, the paraffin, naphthene and aromatic split.
- Kerosene: jet fuel and kerosene. Look at sulphur, smoke point and freeze point, because they decide whether the cut can become Jet A-1 without heavy treating.
- Gasoil / diesel: look at sulphur, cetane index, cloud and pour point. This is the cut that ends up as EN590-type diesel after hydrotreating.
- Vacuum gasoil: conversion-unit feed. Metals, nitrogen and carbon residue matter here.
- Vacuum residue: the bottom of the barrel. High yield of heavy, high-sulphur residue usually means a lower-value crude for a simple refinery.
Read yields both ways the table gives them, by weight and by volume, and read the cumulative row: it tells you how much of the barrel has boiled off by each temperature. Sulphur nearly always climbs from the light cuts to the residue, so a crude's whole-crude sulphur hides where the problem really sits.
This is also why there is no single "best" crude. A refinery with deep conversion units can make money on a heavy sour grade that a simple plant would lose money on. The assay lets each buyer run that sum for their own plant.
Assay, certificate of quality and contract spec
Three documents get mixed up in crude offers, and they do different jobs.
| Document | Who issues it | What it covers |
|---|---|---|
| Assay | Producer, marketer or a lab working for them | The grade in general, from a dated sample. Used to decide whether a grade fits a refinery. |
| Certificate of quality (CoQ) | Independent inspector at the load port | This cargo: samples from named shore tanks or ship's tanks, a date, and the test method for each line. |
| SPA quality clause | Agreed by buyer and seller | The limits the cargo must meet, and whose result counts if there is a dispute. |
An assay never replaces a CoQ. If a seller sends a glossy assay and nothing that ties a cargo to a tank, a ship and an inspector, you have learned about the grade, not about the offer. Our guide to verifying an SGS or Intertek report shows how to confirm a quality report with the office that issued it, and the deal-process guide shows where quality papers sit in the order of documents. Delivery terms change who arranges inspection, which our Incoterms guide for oil cargoes covers.
Assay red flags in crude offers
Crude is where the biggest broker chains form, and the assay is one of the easiest papers to copy. These are the patterns worth stopping on:
- No date, no lab, no sample point. A genuine assay says when and where the sample came from. A table of round numbers with a logo pasted on top does not.
- Density and API that don't agree. Run the formula above. A doctored assay often changes one number and forgets the other.
- Numbers that don't fit the grade's name. If a grade is known publicly as light and sweet, an "assay" showing a heavy, sour crude is a different oil, a different grade or a careless copy. Compare against the producer's own published assay.
- A public library assay presented as "our cargo's CoQ". Assays from producers are free to download. Seeing one attached to an offer proves nothing about the seller.
- "Assay and CoQ after ICPO" or after a fee. A real seller can name the grade, the load terminal and the published assay up front. Paying or signing to see basic quality data is the pattern in our petroleum trading scams guide.
- One assay for a menu of grades. Each grade has its own assay. A single sheet covering "Bonny Light / Brent / ESPO / Basrah" is a template, not an offer.
Mislabelled product is not unique to crude. Our guide to "D6 virgin fuel oil" shows the same problem with residual fuel, where the name on the offer matches no standard at all.
A note on sanctions and Russian-route grades
Some grades you will see in offers, such as ESPO and Urals, are Russian-origin and covered by EU, UK and US sanctions, including import bans and price-cap rules on shipping, insurance and finance. CPC Blend is Kazakh crude exported through a Russian Black Sea terminal and needs careful origin, counterparty and vessel screening. We describe these grades for information only, so buyers can recognise them in an offer. Every TradeNexusMarket member agrees to sanctions screening, and our team does not match deals that break these rules. Take your own legal and compliance advice before signing.
Common questions
What is a crude oil assay? A laboratory study of a crude grade: whole-crude properties such as API gravity, sulphur, TAN, pour point, salt and metals, plus a distillation table showing the yield and quality of each boiling-range cut. Refiners use it to judge whether a grade suits their plant.
Is an assay the same as a certificate of quality? No. The assay describes the grade from a dated sample. A certificate of quality is issued by an independent inspector for a specific cargo, from named tanks, with the test method for each result. A deal needs the CoQ; the assay helps you decide whether the grade is worth buying.
What API gravity counts as light crude? The common convention is above about 31.1 °API for light, 22.3–31.1 for medium, 10–22.3 for heavy and below 10 for extra-heavy. Sweet usually means sulphur under about 0.5%.
Where can I find a genuine assay for a grade? Producers and major marketers publish assays for the grades they sell, often as free downloads with a date on each one. Compare any assay in an offer against the producer's own version, and treat big differences as a question to put to the seller.
How crude is handled on TradeNexusMarket
Crude posts on TradeNexusMarket name the grade, the load port or delivery port, the Incoterm and the quantity. Posting is free and needs no documents. Before a Deal Room opens, sellers and seller mandates show our team company papers and at least one proof of product or authorisation, and a person on our team checks it. Inside the room the stages run in order: signed SPA, inspection, payment instrument, then shipment. The full sequence is in our Deal Room rules.
See the crude oil page for grades and terms, browse the public board, or create a free account to post a requirement.
General information only, not technical, legal or compliance advice. Figures quoted are typical published values with their source named; always use a dated assay from the producer and an independent inspector's certificate for a real deal.
Post free, trade with checked companies
TradeNexusMarket is a B2B marketplace for EN590, Jet A-1, LPG, LNG, crude oil and other fuels. Posting is free and needs no documents. Contacts stay masked, our team makes the match, and both companies are checked before the Deal Room opens. Commission is charged only on a closed deal.
Related reading
- Guide · Deal documentsHow to verify an SGS or Intertek report with the issuer
- Guide · Red flagsThe most common petroleum trading scams, and the paper trail that exposes them
- Guide · Crude oilLOI, ICPO, SPA, POP: the crude oil deal process in plain English
- Guide · Deal documentsIncoterms 2020 for oil cargoes: FOB, CIF, CFR and DAP explained
- Guide · Pricing referencesPlatts and Argus benchmarks explained: CIF NWE, FOB Singapore and FOB Arab Gulf
- Guide · Fuel oilWhat "D6 virgin fuel oil" really is, and what to ask for instead